As a powder coating manager, James Yates thinks very much like a production manager at one of the numerous fabrication shops he serves in the northern Oregon and southern Washington area.
During the recent political season, the airways were filled with horrific examples of former inmates returning to a life of violent crime, but politics being what it is, there was little focus on the correctional success stories.
Quality Powdercoating in Hayden, Idaho, has released plans for a new facility for the company.
Rodger Quesenberry is the Production Manager for the powder coating division at Microfinish in St. Louis, Missouri.
Business has been smoking hot of late for Sadler Powder Coating in Henderson, Texas, and rightly it should.
There is always a deep sense of satisfaction when you pull a substrate out of the curing oven and find no visual imperfections.
Designing a new in-house coating line from scratch is often a once-in-a-lifetime experience for some finishing managers.
The more things change at S&B Finishing, the more they stay exactly the same at the Chicago powder coater.
Winona Powder Coating in Etna Green, Indiana, received a $54,399 state grant that helped pay part of the cost of new equipment.
Quick. Quality. Inexpensive. You can have two, but you can’t have all three.
There are a lot of standard masking products available, but there are times when it makes sense to use a custom masking solution.
N.W. Metal Fabricators in Oregon is building a new powder coating facility because of fast growth.
Ensuring that the powder is fluidizing properly is essential to a successful powder coating application.
Nothing can interrupt the status quo at a powder coating operation like adding automation to the mix.
Metal Solutions in Utica, New York, installed a new powder coating system at its Broad Street plant with the help of a grant.
Mike Chapman from WolfRayet spoke with FinishingAndCoating.com’s Editor-in-Chief Tim Pennington, about the new company’s product lines for the heat-sensitive substrate market.
Going from a 7,000-square-foot powder coating operation to a 70,000-square-foot facility isn’t something done overnight, and managing it doesn’t get any easier.
